Performing regular maintenance for garbage disposals is something users should inculcate. The blades and other active parts of a garbage disposal may experience clogging. This is especially when there’s not enough water and too much fibrous material or grease. By identifying the actual problem, you may be able to resolve issues on a garbage disposal. You can follow the simple tips below to handle any garbage disposal repair.
How To Service Leaking Hoses
The area beneath your sink should be properly checked. The seals or hoses may have a problem if the area underneath your sink is wet. Another good method is to try to capture the liquid. You will be able to know the actual place where the leak is emanating from through the content and color of the liquid. If the leak is emanating from a drain pipe or dishwasher intake, the liquid will be discolored or brown. If the leak is coming from your sink, then the liquid will be clear.
On the dishwasher intake, drain pipe or sink, put your hand over the garbage disposal lid. This will help you discover the actual area where the water is coming out from. Around the seal, you can ensure to tighten the mounting bolts. Without further repair, this idea will help to resolve your problem. Go ahead to check if the leak is still continuing after turning on the water. If the water is still leaking, then try to buy a new seal for replacement. To achieve this, you will have to get rid of the seal, dismantle the hose and shut off the source of the water.
Methods To Unclog A Garbage Disposal
If you are able, simply find your garbage disposal manual book. This manual book will help you have access to a diagram and instructions for garbage disposal repairs. In fact, the manual will help you avoid any further damage of your disposal. Finding the hex wrench that comes with your disposal is another good idea to note. If you want to handle small repairs, this tool will help provide the best result. With the help of the circuit breaker, you can turn off the disposal. The impellers may not get power running through them if the wall switches are not correctly linked.
Tips To Fix A Flywheel
One of the best ways to handle this problem is by checking your disposal’s impellers. If your disposal’s impellers are turning and clogged, then the flywheel may be improper. To achieve this, you can move beneath your sink to check the disposal. Power should be turned off completely to access the disposal.
The next step is to locate the hex holes. At the bottom of the disposal, go ahead loosening the flywheel by using the hex wrench. If you find any debris around the flywheel get rid of it because this may cause clogs. If the impeller blades are faulty, release the nut found on the flywheel. The hose fittings linked to the impellers and disposal flywheel should be removed as well. For more information on garbage disposal repair, customers can contact A Better Plumber. We use the latest trends and technologies to repair garbage disposals.
A Better Plumber